European quality at a competitive price.

This smart battery charger is designed especially for various kinds of batteries in various applications. Combined with most up to date technology it is suitable for LP12Vxxx battery recharging. Available in 12V and 24V versions. (Note 24V version is not suitable for LP12V series batteries, EVP12V series only).

LFP batteries can be permanently damaged by either overcharge or remaining undercharged for any period of time. This smart battery charger will continuously deliver the correct charge.

Features:

• Model EP1240 - 12V 40A charge rate
• Model EP2420 - 24V 20A charge rate
• 240VAC input 600W
• isolated outputs
• Outputs to separately charge up to three batteries with common ground.
• 6 stage charging algorithm
• Wall mount
• Remote display (battery volts and amps) option.
• proportional fan speed for quiet operation.
• 4 switch selectable battery types
• can also be used as a 12V (24V) 40A power supply
• temperature compensation probe for SLA batteries.
• inbuilt safety for reverse polarity, wrong battery etc.
• coated PCB for salt/moisture resistance
• Stylish anodized matt aluminium enclosure
• Ideal for marine and RV applications
• 12 month factory warranty
• C-Tick EMC Compliant - N22214 (EV Power Aust.)

Contact us for more specs and pricing

LiFePO4 batteries must not be allowed to run flat or permanent damage will result.

This device monitors the output voltage of the battery. If the terminal voltage drops below 11.9V, the battery will be automatically disconnected to prevent deep-cycle damage and finding a dead battery when you go to start your vehicle.

11.9V equates to approximately 10% remaining capacity in a LiFePO4 battery.

Very easy to install, it can be mounted on the top or beside the battery and can be manually overridden if required. Essential for boats, camping, caravans, RVs, 4WD, solar power or any system where the load may drain the battery flat.

Features:

• High cranking capacity for car engines
• Low power consumption
• 1 year warranty
• Mounting hardware included

Specifications:

• Supply voltage: 12VDC
• Power consumption (standby): 15mA
• Rated input/output current: 100A
• Cranking current: 350A
• Operating temperature range: -25 - 125°C
• Dimensions: 85(H) x 55(W) x 35(D)mm

This fully automatic charger uses switchmode technology to efficiently charge a LiFePO4 battery. Simply plug onto the battery and forget - the battery will fast charge, then automatically switch to float (trickle) charge when full. It is housed in a robust metal frame, and powered from 240V, features fan cooling, and includes 700mm fly leads with heavy duty battery clips. Each unit features a power indicator LED and power switch, as well as a switch to select between full or half current. Also includes a 5 segment LED bargraph to indicate the charge state.

• Suits LiFePO4 batteries
• Compact, Reliable and fully automatic
• Reverse, Short circuit, thermal and overload protection
• Uses advanced MOSFET technology
• Over 85% efficiency
• Supplied with a mains lead.

• Max Current: 12A/6A +-5%
• Wattage: 160W
• Equaliser Charge: 14.4V +- 0.1V
• Floating Charge: 13.8V +- 0.1V
• Operating Ambient: 0 50 degrees C
• Dimensions: 197(L) x 96(W) x 48(H)mm
• Weight: 850g
• AC input: 220VAC
• Efficiency: >85%